The B02 thimble style sensor incorporates a highly contact-sensitive sensing surface in a less than ½ inch high housing. Low-profile and durable – the B02 can fit into tight locations with minimal disruption to surrounding piping, fixtures and insulation.B02顶针风格传感器包含一个高度接触敏感传感表面不到½英寸高的住房。低轮廓和耐用- B02可以适应紧的位置，对周围的管道，夹具和绝缘的破坏最小。
Features and Benefits:特点和优点:
• Application: Surface measurement of a pipe, duct, or other surface where direct immersion is impossible or impractical. Mounts with hose clamp or adhesive directly to surface to be measured.•应用:对管道、管道或其他直接浸入不可能或不实际的表面进行表面测量。用软管夹或胶粘剂直接安装到表面以测量。
• Accuracy:•精度:
» RTD: Standard 0.10% of resistance at 0.0°C»RTD:标准0.10%的阻力位在0.0°C
» Thermocouple: Special limits of error per ANSI MC96.1, 热电偶:每个ANSI MC96.1的特殊误差范围，
• Element/ Lead Wire Configuration:•元件/引线配置:
» RTD: Single 3 or 4 wire, Dual 3 wire单3或4线，双3线。
» Thermocouple: Single or Dual, Type E, J, K, and T热电偶:单或双，E型，J型，K型和T型。
• Lead Wire:•导线:
» RTD: PTFE insulated conductors with FEP jacket; Three-wire single- 22 AWG, Four-wire single
and Dual- 26 AWG»RTD:带有FEP外壳的聚四氟乙烯绝缘导体;三线单- 22 AWG，四线单。和双- 26 AWG
» Thermocouple: PTFE tape insulated conductors with PTFE tape cover, 24 AWG 热电偶:PTFE磁带绝缘导线，PTFE带盖，24 AWG。
见下表。